0.5mm double groove plate to plate connector female base h4.0 with column
3723-fxxx040xxr0x 0.5mm double groove plate to plate connector female base h4.0 SMT with column
Basic Parameters
Floating Board to Board connector, nominal current: 7a Rated voltage (II / 2): 250V, needle pitch: 3.5mm, color: green, contact surface: Tin
Engineering Parameters
Various configurations such as vertical, right angle and blind insertion can be used, and the design is flexible and scalable. The blade terminals are designed in double row with a spacing of. 050 inches. They are installed in a polarized "d" housing with strong mechanical protection. The housing is made of high temperature UL 94V-0 thermoplastic. The terminal has a gold-plated coating of 30 micro inches in the plug-in area, which has long-term reliability and durability. IDT cable sockets are terminated with. 025 inch flat or multilayer single wire cables. The built-in polarity key can prevent the wrong insertion of the edge card of the printed circuit board. The cable clamping cover prevents the cable from pulling out, so there is no need to use another fastening cover.
Basic Parameters
| Category | Floating Type Board to Board Connector | ||
| Spacing | 0.635 | mm | |
| Type | Male | ||
| High | 4.00 | mm | |
| Positioning | With Positioning | ||
| Cover | No Cover | ||
| Degree | SMT | ||
| Pin Num. | 20 | 100 | Pin Num. |
Engineering Parameters
| Rated Voltage | 50 | AC/DC | |
| Rated Current | 0.5 | AMP | |
| Contact Resistance | 80 | mΩ Max | |
| Insulation Resistance | 500 | mΩ Min | |
| Withstand Voltage | 500 | AC/minute | |
| Operating Temperature | -40 | 105 | ° C |
| Contact Material | Phosphor Bronze Gold-Plated | ||
| Contact Placting | Gold plated Over Ni | ||
| Insulator Material | LCP | ||
| Max. Processing Temp. | 230° C for 30-60 seconds 260° C for 5 seconds | ||
